Relationship between the occlusal plane and three different levels of ala-tragus line in a sample of sudanese adults / Relación entre el plano oclusal y tres niveles diferentes de la línea ala-trago en una muestra de adultos sudaneses

Aim: Correct orientation of the occlusal plane plays a vital role in achieving the perfect occlusal balance and function of complete dentures. This study aimed to evaluate the most reliable posterior reference point of the ala-tragus line (ATL) concerning occlusal plane (OP) in a sample of the dentate Sudanese population. Materials and Methods: A total of 150 subjects with healthy and well-aligned permanent teeth were randomly selected. Right lateral profile photographs were taken with subjects having a fox plane placed intra-orally, contacting the occlusal plane. Reference points corresponding to inferior, middle, and superior borders of the tragus and inferior border of the ala of the nose were marked on photographs. The angles between the lines were measured using the Auto-CAD software program, and the most parallel relationship was determined. Descriptive statistics in terms of means and standard deviations were presented. Independent t-test and one-way ANOVA tests were used to compare as appropriate. A p-value < 0.05 was considered significant. Results: The mean angle formed by the OP and ATL was 8.5±3.69º for the superior level, 4.68±3.13º for the middle line, and 2.89±2.57º for the inferior line. A significant difference was found between the means of the three angles (p< 0.001), while no significant difference (p> 0.05) was found between both genders regarding the measured angles. Conclusions: The line joining the inferior border of the ala of the nose with the inferior border of the tragus of the ear was the most reliable line in terms of parallelism to determine the occlusal plane orientation.

Antecedentes: La orientación correcta del plano oclusal juega un papel vital para lograr el equilibrio oclusal perfecto y la función de las prótesis completas. Este estudio tuvo como objetivo evaluar el punto de referencia posterior más confiable de la línea ala-trago (ATL) con respecto al plano oclusal (OP) en una muestra de la población dentada de Sudán. Materiales y Métodos: Se seleccionaron aleatoriamente un total de 150 sujetos con dientes permanentes sanos y bien alineados. Se tomaron fotografías de perfil lateral derecho de sujetos a los que se les colocó un plano de zorro intraoralmente, en contacto con el plano oclusal. En las fotografías se marcaron los puntos de referencia correspondientes a los bordes inferior, medio y superior del trago y al borde inferior del ala de la nariz. Los ángulos entre las líneas se midieron utilizando el programa de software Auto-CAD y se determinó la relación más paralela. Se presentaron estadísticas descriptivas en términos de medias y desviaciones estándar. Se utilizaron prueba-t independiente y prueba ANOVA unidireccional para las comparaciones, según correspondiera. Se consideró significativo un valor de p<0,05. Resultados: El ángulo medio formado por OP y ATL fue de 8,5±3,69º para el nivel superior, 4,68±3,13º para la línea media y 2,89±2,57º para la línea inferior. Se encontró una diferencia significativa entre las medias de los tres ángulos (p< 0,001), mientras que no se encontró diferencia significativa (p>0,05) entre ambos sexos con respecto a los ángulos medidos. Conclusión: La línea que une el borde inferior del ala de la nariz con el borde inferior del trago de la oreja fue la línea más confiable en términos de paralelismo para determinar la orientación del plano oclusal.

Application of body surface markers localization in totally implantable venous access port implantation via internal jugular vein approach / 国际外科学杂志

Objective:To investigate the feasibility of using body surface marker localization method to determine the correct position of catheter tip (lower 1/3 of the superior vena cava or the junction of superior vena cava and right atrium) in totally implantable venous access port (TIVAP) implantation via internal jugular vein approach.Methods:The clinical data of 220 patients who underwent TIVAP implantation in Beijing Tongren Hospital, Capital Medical University from June 2019 to June 2021 were retrospectively analyzed. Among them, 168 patients used the internal jugular vein approach. According to the method implemented for determining the length of central venous catheter (CVC) during the operation, the patients were divided into two groups: 136 patients using the body surface marker localization method were defined as the study group; and the remaining 32 cases treated by the intraoperative X-ray fluoroscopic localization method were defined as the control group. The difference in the excellent or good rate of CVC tip position immediately after implantation and the time of implantation was compared between the two groups. In addition, the correlation between the length of CVC indwelling, height, age, and the distance between the catheter tip and tracheal carina was analyzed for the patients with right and left internal jugular vein catheterization. Kolmogorov-Smirnov test was used for statistical distribution of measurement data. Normal distribution of measurement data was expressed as mean ± standard deviation ( ± s), independent sample t-test was used for comparison between groups. Chi-square test was used for comparison between counting data. With TIVAP catheter indenture length as dependent variable and height as independent variable, Pearson correlation analysis was performed, the relationship equation between ideal catheter indenture length and patient height was analyzed by unitary linear regression. Results:When the CVC tip was located at the second intercostal space, the third sternocostal joint and the third intercostal space, the corresponding probability of being in the correct position was 34.8%, 83.3% and 95.0% respectively. The third sternocostal joint or the third intercostal space had a higher probability of correct CVC tip location than the second intercostal space, and the difference were statistically significant ( P<0.001). Furthermore, there was no significant difference in the possibility of the CVC tip located in the correct position between the third sternocostal joint and the third intercostal space ( P=0.149). Compared with the control group (before adjusting catheter position), the proportion of excellent or good CVC position in the study group was significantly improved (94.1% vs 46.9%), and the difference was statistically significant ( χ2=41.99, P<0.001); while the total operation time was significantly shortened [(33.04±6.69) min vs (42.50±5.54) min], and the difference was statistically significant ( P<0.05). There was a linear correlation between the length of CVC insertion and height. Indwelling catheter length via right internal jugular vein approach (cm) =0.159× height (cm)-1.284 ( r=0.597, r2=0.356, P<0.001); length of catheter indwelling through the left approach (cm) =0.097× height (cm) + 12.139 ( r=0.322, r2=0.104, P=0.020). Conclusions:The third sternocostal joint or the third intercostal space would be the corresponding correct surface landmark of the CVC tip when the body surface marker localization method was adopted during the TIVAP implantation via the internal jugular vein approach. Compared with the intraoperative X-ray fluoroscopy localization, the operation time is significantly shortened with the application of the body surface marker localization method. This technique is simple and easy to master and has high reliability in determining the length of catheter and the position of CVC tip.

Automatic determination of mandibular landmarks based on three-dimensional mandibular average model / 北京大学学报(医学版)

OBJECTIVE@#To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method.@*METHODS@#The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research.@*RESULTS@#The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm.@*CONCLUSION@#The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.

Marcos anatômicos na radiografia para cateter central periférico em neonatos: revisão integrativa / Puntos anatómicos en la radiografía para catéter central periférico en neonatos: revisión integradora / Anatomical landmarks on radiography for peripheral central catheter in newborns: integrative review

Resumo Objetivo Sumarizar as evidências científicas sobre os marcos anatômicos, na radiografia, utilizados para avaliar a ponta distal do cateter central de inserção periférica em recém-nascidos. Métodos Trata-se de uma revisão integrativa da literatura realizada nas bases de dados Web of Science, National Library of Medicine (PubMed/MEDLINE) e Scopus, entre os anos de 2017 e 2021. Resultados Dos 263 documentos encontrados nas bases, 13 preencheram os critérios de elegibilidade e foram selecionados para análise. Destes, 12 eram estudos observacionais e um experimental. Quanto ao país de origem, apenas um estudo foi publicado no Brasil, cinco na China, dois nos Estados Unidos da América e um estudo na Itália, Alemanha, Canadá, Irã e Índia. As evidências encontradas demonstraram a existência de sete marcos anatômicos utilizados na radiografia para visualização da ponta do cateter percutâneo em neonatos, sendo a unidade vertebral o referencial norteador predominante. Conclusão Para cateteres inseridos em membros superiores, os marcos anatômicos que mais se aproximam da junção cavo-atrial são a quinta e sétima vértebra torácica, ou duas unidades vertebrais abaixo da carina. Para os membros inferiores, o posicionamento da ponta do cateter deve estar entre a nona e décima vértebra torácica ou acima da quarta vértebra lombar.

Resumen Objetivo Sintetizar las evidencias científicas sobre los puntos anatómicos, en radiografías, utilizados para evaluar el extremo distal del catéter central de inserción periférica en recién nacidos. Métodos Se trata de una revisión integradora de la literatura realizada en las bases de datos Web of Science, National Library of Medicine (PubMed/MEDLINE) y Scopus, entre los años 2017 y 2021. Resultados De los 263 documentos encontrados en las bases, 13 cumplieron con los criterios de elegibilidad y fueron seleccionados para análisis. Entre ellos, 12 eran estudios de observación y uno era experimental. Con relación al país de origen, únicamente un estudio fue publicado en Brasil, cinco en China, dos en Estados Unidos de América y un estudio en Italia, Alemania, Canadá, Irán e India. Las evidencias encontradas demostraron la existencia de siete puntos anatómicos utilizados en la radiografía para la visualización de la extremidad del catéter percutáneo en neonatos, y la unidad vertebral fue el referente orientador predominante. Conclusión Para catéteres insertados en miembros superiores, los puntos anatómicos que más se aproximaron a la unión cavoatrial son la quinta y la séptima vértebra torácica o dos unidades vertebrales por debajo de la carina. Para los miembros inferiores, la ubicación de la extremidad del catéter debe estar entre la novena y la décima vértebra torácica o sobre la cuarta vértebra lumbar.

Abstract Objective To summarize the scientific evidence on anatomical landmarks on radiography used to evaluate the distal tip of the peripherally inserted central catheter in newborns. Methods This is an integrative literature review performed between 2017 and 2021 in Web of Science, National Library of Medicine (PubMed/MEDLINE) and Scopus databases. Results Thirteen out of 263 documents found in the databases met the eligibility criteria and were selected for analysis. Of these, 12 were observational studies and one was experimental. As for the country of origin, only one study was published in Brazil, five in China, two in the United States of America; and Italy, Germany, Canada, Iran and India with one study each. The evidence found demonstrated the existence of seven anatomical landmarks used in radiography to visualize the tip of the percutaneous catheter in newborns, and the vertebral body as the predominant guiding reference. Conclusion For catheters inserted in the upper limbs, the anatomical landmarks closer to the cavo-atrial junction are the fifth and seventh thoracic vertebrae, or two vertebral bodies below the level of the carina. For the lower limbs, the catheter tip should be positioned between the ninth and tenth thoracic vertebrae or above the fourth lumbar vertebra.

Anatomic and functional analysis of thoracic kyphosis and lumbar lordosis / Avaliação anatômica e funcional da cifose torácica e lordose lombar / Análisis anatómica y funcionalde la cifosis torácica y la lordosis lumbar

ABSTRACT Objective: Rate and compare radiographic measurements of thoracic kyphosis and lumbar lordosis using anatomical and dynamic parameters. Methods: Measurements were performed on lateral radiographs of 10 adults of both sexes without spinal disease or deformity. Thoracic kyphosis and lumbar lordosis were measured using anatomical parameters (T1-T12, T4-T12, T5-T12 and L1-S1) or dynamic parameters (cervicothoracic or thoracolumbar inflection point). Results: Thoracic kyphosis and lumbar lordosis were different in 30% of subjects. Differences in thoracic kyphosis values were observed according to the anatomical reference used for measurement. Lumbar lordosis wasn`t statistical difference considering the anatomical or dynamic reference, but in 30% of the individuals the inflection point was different from the anatomical reference. Conclusions: Thoracic kyphosis and lumbar lordosis values differ according to anatomical and dynamic references. The reference used must be considered in the measurement and interpretation of values. Level of evidence IV; Case series.

RESUMO: Objetivo: Avaliar e comparar as mensurações radiográficas da cifose torácica e lordose lombar utilizando parâmetros anatômicos e dinâmicos. Métodos: As mensurações foram realizadas nas radiografias em perfil de 10 adultos de ambos os sexos sem doença ou deformidade da coluna vertebral. A cifose torácica e a lordose lombar foram mensuradas utilizando parâmetros anatômicos (T1-T12,T4-T12, T5-T12 e L1-S1) ou dinâmicos (ponto de inflexão cervicotorácico ou toracolombar) Resultados: As referências anatômicas e dinâmicas para a identificação da cifose torácica e lordose lombar foram diferentes em 30% dos indivíduos. Foi observado diferença dos valores da cifose torácica de acordo com a referência anatômica utilizada para a mensuração. A lordose lombar não apresentou diferença estatística considerando a referência anatômica ou dinâmica, mas em 30% dos indivíduos o ponto de inflexão era diferente da referência anatômica. Conclusões: Os valores da cifose torácica e lordose lombar apresentam diferenças de acordo com as referências anatômicas e dinâmicas. A referência utilizada deve ser considerada na mensuração e interpretação dos valores. Nível de evidência IV; Série de casos.

RESUMEN: Objetivo: Calificar y comparar medidas radiográficas de cifosis torácica y lordosis lumbar utilizando parámetros anatómicos y dinámicos. Métodos: Las mediciones se realizaron en radiografías laterales de 10 adultos de ambos sexos sin enfermedad o deformidad de la columna. La cifosis torácica y la lordosis lumbar se midieron mediante parámetros anatómicos (T1-T12, T4-T12, T5-T12 y L1-S1) o dinámicos (punto de inflexión cervicotorácico o toracolumbar). Resultados: La cifosis torácica y la lordosis lumbar fueron diferentes en el 30% de los sujetos. Se observaron diferencias en los valores de cifosis torácica según la referencia anatómica utilizada para la medición. La lordosis lumbar no fue diferencia estadística considerando la referencia anatómica o dinámica, pero en el 30% de los individuos el punto de inflexión fue diferente de la referencia anatómica. Conclusiones: Los valores de cifosis torácica y lordosis lumbar difieren según referencias anatómicas y dinámicas. La referencia utilizada debe ser considerada en la medición e interpretación de los valores. Nivel de evidencia IV; Series de casos.

Importance of distal radius teardrop angle in the treatment of distal radius middle column fracture / 中华骨科杂志

Objective:To investigate the importance of measuring and restoring distal radius tear drop angle in the treatment of distal radius middle column fracture with anterior collapse of lunate fossa joint.Methods:Thirty one cases of distal radius fractures in 29 patients was reported for 2 years from January 2018 to January 2020. Two patients with both distal radius fractures were included in this study. All cases in this group were treated by operation. Among the 29 patients, there were 20 males and 9 females. Their ages were 44.9±15.1 years (ranged from 20 to 78 years). Two patients with both distal radius fractures were included in this study, due to both teardrop angle (TDA) reduced. The time from injury to operation was 4-17 d, with an average of 6.9 d. Except for 2 cases of fracture with simple volar approach, the other cases were treated with combined volar and dorsal approach. All patients were treated with open reduction and internal fixation with plates and bone grafting. The teardrop angle was measured before and after operation, and the effect of surgical recovery of teardrop angle was compared. The wrist function was evaluated by Gartland-Werley scores.Results:The wounds of all patients healed in one stage without postoperative infection. The follow-up time of 29 patients were 15.1±5.2 months, ranged from 7 to 31 months. The healing time for all fractures was 10.3±2.9 weeks (from 8 to 16 weeks). No fracture nonunion or redisplacement. In 31 cases, the tear drop angle was 33.4°±5.83° (20°-45°) before operation, and 58.9°±9.89° (35°-70°) after operation. At the end of follow-up, Gartland-Werley scores was 4.7±4.6, ranged from 0 to 17. Among them, 10 cases were excellent, 16 were good, 5 cases were fair, and the excellent and good rate was 83.9%. The Gartland-Werley scores of the two subgroups with postoperative tear drop angle recovery ≥50° and <50° were compared, and the results were significantly different (the excellent and good rate for two subgroups were 96.2% and 20.0% respectively ( P=0.001). Conclusion:The distal radius fracture with significantly reduced tear drop angle should be actively treated. The measurement and recovery of tear drop angle is an important factor affecting the functional outcome of distal radius fracture with anterior edge collapse of lunate fossa joint, which should be highly concerned by clinical doctors. The recovery of teardrop angle mostly requires dorsal approach.

Métodos de Registro de Dimensión Vertical Oclusal en Pacientes Dentados: Revisión Sistemática

RESUMEN: La Dimensión Vertical Oclusal, es la distancia entre un punto anatómico fijo en el maxilar y otro sobre la parte móvil de la mandíbula cuando los órganos dentarios están en contacto oclusal. La obtención de este registro determina el espacio vertical necesario para la rehabilitación de los pacientes. En la actualidad existen distintos métodos para el registro de la Dimensión Vertical Oclusal, en este estudio se analizaron: Métodos fisiológicos y métodos mecánicos. El objetivo fue realizar una revisión sistemática, sobre los métodos de registro, para determinar la Dimensión Vertical Oclusal en pacientes dentados. Se recopiló información científica desde Mayo 2019 hasta Julio 2020 en diferentes bases de datos electrónicas, encontrando un tota l de 13948 artículos, después de eliminar artículos repetidos, por título, por resumen y por metodología PICO se seleccionaron un total de 24 artículos para su análisis y clasificación. Más de un autor menciona que no existe un método unirversalmente aceptado o exacto para determinar la Dimensión Vertical Oclusal. Se sugiere la combinación de varios métodos de registro de Dimensión Vertical Oclusal, se debe de considerar la manera más adecuada para lograr un registro más acertado.

ABSTRACT: Occlusal Vertical Dimension is the distance between an anatomical point in the maxilla and another on the mobile part of the mandible when the teeth are in occlusal contact. Obtaining this record determines the vertical space necessary for the rehabilitation of patients. Nowadays there are different methods for the record of the Occlusal Vertical Dimension, in this study the following were analyzed: physiological methods and mechanical methods. The objective was to do a systematic review of the registration methods to determine the Occlusal Vertical Dimension in dentate patients. Scientific information was collected from May 2019 to July 2020 in different electronic databases, finding a total of 13,948 articles, after eliminating repeated articles, by title, by abstract and by PICO methodology, a total of 24 articles were selected for analysis and classification. More than one author mentions that there is no universally accepted or exact method for determining Occlusal Vertical Dimension. A combination of several methods of Occlusal Vertical Dimension registration is suggested; it should be considered the most appropriate way to achieve a more accurate registration.

Reliability of tibial anterior crest as the anatomical reference of rotating alignment for tibial component in total knee arthroplasty / 中国骨伤

OBJECTIVE@#This study aimed to research whether anterior tibial crest is a reliable anatomical reference for rotational alignment of tibial component in TKA.@*METHODS@#The study included 122 patients who underwent computed tomography angiography (CTA) examination for unilateral lower extremity trauma with normal contralateral lower extremities, including 89 males and 33 females, with an average age of(51.4±16.4) years old(ranged 18 to 81 years old). Picture archiving and communication system (PACS) was used to mark 11 lines including the surgical epicondylar axis (SEA) connecting the most prominent points of the lateral epicondyle and the deepest point of the sulcus on the medial epicondyle of the femur, axis of medial border of patellar tendon (MEPT)connecting the middle of the posterior cruciate ligament (PCL) and medial border of the patellar tendon at the level of a standard tibial cut from 8 mm distal of the lateral tibial joint surface, transverse axis of tibia (TAT) at the level of a standard tibial cut from 8 mm distal of the lateral tibial joint surface, Akagi line connecting the projected middle of the PCL and medial border of the patellar tendon at the tibial attachment, the axis of the medial 1/3 of patellar tendon(M1/3) connecting the projected middle of PCL and the medial 1/3 of the patellar tendon at the patellar tendon attachment level, Insall line connecting the projected middle of the PCL and the medial 1/3 of tibial tubercle, the axis of medial border of tibial tubercle (MBTT) connecting the projected middle of the PCL and medial border of tibial tubercle, as well as the axis of the proximal anterior tibial crest (PATC), axis 1 of the middle anterior tibial crest (MATC1), axis 2 of the middle anterior tibial crest (MATC2) and the axis of the distal anterior tibial crest (DATC) which were marked by connecting the 4 equidistant points on the sharp anterior tibial crest and the projected middle of the PCL. The angles between TAT and SEA as well as the angles between other axes and the perpendicular to SEA were measured. Pairwise differences among the 10 tibial axes were examined using One-Way ANOVA and paired @*RESULTS@#The angles between the axes of MEPT, Akagi line, M1/3, Insall line, MBTT, PATC, MATC1, MATC2, DATC and the perpendicular to SEA were (-1.6 ±4.5)° , (1.4 ±5.0)° , (10.2±5.1)°, (11.9±5.4)°, (3.6±4.8)°, (12.0±6.9)°, (7.2±8.6)°, (7.1±10.4)°, (6.6±13.5)°, respectively. The angle between TAT and SEA was (4.1±5.3)°. MEPT was external rotation compared to SEA. M1/3, Insall line and PATC were significantly greater than Akagi line, MBTT, TAT (@*CONCLUSION@#The middle tibial anterior crest can be used as a reference for rotational alignment of tibial component in TKA, and its reliability is better than Insall line, but worse than Akagi line, TAT and MBTT.

Effect of Experience in Landmark Identification on 2D Lateral Cephalograms on Performance of Dental Students Concerning Landmark Identification on 3D Cone Beam Computed Tomography Scans

Abstract Objective: To assess the effect of experience in landmark identification on two-dimensional (2D) lateral cephalograms on performance of dental students concerning landmark identification on three-dimensional (3D) cone-beam computed tomography (CBCT) scans. Material and Methods: This quasi-experimental study evaluated 40 dental students in two groups (n=20). Group 1 included senior dental students who had experience in landmark identification on 2D lateral cephalograms and Group 2 included third-year dental students with no such experience. Both groups received instructions on identification of eight landmarks on 3D CBCT scans. The coordinates of the landmarks were determined in x, y and z axes. One orthodontist determined the mean coordinates of each landmark as a reference by twice measurements with a one-week interval. The mean distance from the identified points to the reference points was reported as the mean consistency (MC), and the standard deviation of the mean was considered as precision of landmark identification. Data were analyzed using independent samples t-test. Results: The mean distances from the points identified as nasion, point B, orbitale, anterior nasal spine (ANS), menton, coronoid process and pogonion in x, y and z axes and point A in x and z axes (p<0.001) to the reference points in Group 1 were greater than those in Group 2 with no such experience. Conclusion: Previous experience in landmark identification on 2D cephalograms does not help in landmark identification on 3D CBCT scans and may even adversely affect the results.

Correlation between highest point of greater trochanter and the ideal entry point for antegrade femoral nailing by three-dimensional images / 中国骨伤

OBJECTIVE@#To provide reference of the ideal entry point for antegrade femoral nailing according to analysis correlation between highest point of greater trochanter and the middle line of the medullary cavity in adults by three-dimensional images.@*METHODS@#From January 2016 to January 2017, 107 adults who underwent continuous computed tomography (CT) scans were ultimately enrolled, including 64 males and 43 females with an average age of (51.7±16.4) years old;54 patients on the left side and 53 patients on the right side. Three-dimensional images were built by using image-processing software (Volume Viewer) to reconstruct geometry of cortex and medullary canal. All people weregrouped according to different femoral greater trochanter morphology, such as anterior apex (AA), posterior apex (PA), middle apex (MA) and none apex (NA). Forwards inclination was adjusted to apparent neck shaft angle (ANSA) and true neck shaft angle (TNSA) on the coronal and saggittal view, recorded as C-ANSA, C-TNSA, S-ANSA, S-TNSA respectively, vertical distance from the middle line of femur medullary cavity to the highest point of greater trochanter of femur on the 4 positions were measured and performed statistical analysis, multiple linear regression was applied to analysis relationship between clinical data and VD value.@*RESULTS@#(1)Comparison of VD value among 4 groups on the 4 positions, there were no difference in VD value between AA and MA groups on the S-ANSA position;and no differences in VD value among AA, MA and NA groups on the C-ANSA and C-TNSA position. (2)There were differences in VD value among AA, MA and NA groups on the sagittal plane;while had difference in VD value between PA and NA group on the coronal plane. (3)Prediction equation of VD value on S-ANSA and S-TNSA position by multiple linear regression showed R=0.343, F=3.409, =0.012 on the S-ANSA position;R=0.317, F=2.846, =0.028 on the S-TNSA position; neck shaft angle and sex were risk factors of VD value on the sagittal plane, while no difference in VD value on the coronal position.@*CONCLUSION@#(1)When indentify insertion point in adult femoral nail according to the highest point of greater trochanter as anatomic landmark, the morphology of greater trochanter of femur should be distinguished to certain observation position, then evaluate migration before and after on the sagttial plane and lateral offset on the coronal plane. (2)Migration before and after on the sagttial plane is increase with increase of neck shaft angle, and the degree of migration of female before and after is less than that of male.

Accuracy of different anatomic landmark methods in determining size of nasopharyngeal airway / 中华麻醉学杂志

Objective To evaluate the accuracy of different anatomic landmark methods in determining the size of nasopharyngeal airway.Methods Fifty-two patients of both sexes,aged 16-60 yr,of American Society of Anesthesiologists physical status Ⅰ to Ⅲ,with body mass index of 18-30 kg/m2,scheduled for elective awake craniotomy for supratentorial tumors under sedation-awake-sedation anesthesia,were included.For each patient,the distance from the apex of nose to the right tragus (NT),distance from apex of nose to the right mandibular angle (NM),and thyro-mental distance (TM) were measured and marked on a transnasal tube correspondingly.The patients were placed in supine position without pillow,topical anesthesia (nasal mucosal surface) was performed with 2％ lidocaine,and patients were sedated with midazo1am,propofol and dexmedetomidine.When Observer's Assessment of Alertness/Sedation Scale score was 2 or 3 points,the tube was transnasally inserted to each marked depth.When the three marked depths mentioned above were reached,the positions of the tube's tip were checked using a fiberoptic bronchoscope and recorded as:above epiglottis (the tip of the tube was placed between the epiglottis and the free edge of soft palate) or below epiglottis (the tip of the tube placed at or beyond the epiglottis).Results When the depth reached the NT mark,the tube's tip was above epiglottis in 14 cases (27％),and the tube's tip was below epiglottis in 38 cases (73％).When the depth reached the NM mark,the tube's tip was above epiglottis in 31 cases (60％),and the tube's tip was below epiglottis in 21 cases (40％).When the depth reached the TM mark,the tube's tip was above epiglottis in 52 cases (100％).Compared with the NM and NT methods,the TM method had a higher probability with the tube's tip above epiglottis when used to determine the depth of insertion (P＜0.01).Conclusion TM anatomic landmark method provides higher accuracy in determining the size of nasopharyngeal airway.

Simplified equation for determining proper depth of peripherally inserted central catheter in relation to anatomical landmarks / 대한마취과학회지

BACKGROUND: The aim of this study was to develop a formula guiding the peripherally inserted central catheter (PICC) tip placement based on anatomical landmarks such as the upper arm, clavicle, and sternum as well as the patient’s height, weight, and body mass index. METHODS: Fifty-five patients who were scheduled to have PICCs were included in the study. We measured four distances along the passage of the PICC, which were as follows; the tip of the third finger to the middle of the elbow crease (Distance A), the middle of the elbow crease to the acromion process (Distance B), the acromion process to the sternal head of the clavicle (Distance C), and the sternal head of the clavicle to the end of the xiphoid process (Distance D). The lengths from the elbow creases to their carina bifurcations as determined by fluoroscopy during PICC insertions were recorded and used as reference. RESULTS: The formula for determining PICC depth based on the four distances was determined by regression analysis. The optimal formula was determined to be 25.3 + 0.5 × (Distance C) + 0.6 × (Distance D) which yielded an R2 value of 0.3. CONCLUSIONS: The formula proposed for proper depth of the adult, 25.0 + 0.5 × (clavicle length) + 0.6 × (sternum length) for PICC insertion can be used to place the tip at the carina bifurcation level. The distance from elbow crease to catheter insertion point should be added to the length generated by this formula.

Radiological study on the cup abduction angle during total hip arthroplasty / 中国骨伤

OBJECTIVE@#To analyze the relationship among the parameters by measuring the relevant parameters of the anteroposterior X-ray of both hips in patients after total hip arthroplasty, to discuss the reliable anatomical markers and reference standards of acetabulum placement in total hip arthroplasty, and finally to accurately control the abduction angle of acetabulum.@*METHODS@#From January 2016 to June 2017, 282 patients (235 hips) underwent total hip arthroplasty and 128 patients(157 hips) met the inclusion criteria. There were 91 males and 37 females, 82 cases of the left hip and 75 cases of the right hip; ranging in age from 22 to 78 years old, with a mean of 55.1 years old. The abduction angle(β), ilium thickness (a), acetabular cup insertion depth (b), ischial thickness (c), acetabular cup insertion depth(d), acetabular abrasion and contusion depth(e) were measured on the postoperative AP X-ray of both hips, and the data were compared.@*RESULTS@#There was a positive correlation between β and b (=0.424, =0.000), a negative correlation between β and d (=-0.407, =0.000), a positive correlation between β and b/a (=0.419, =0.000), a negative correlation between β and d/c (=-0.472, =0.000). There was a linear relationship between β and b/a (5.753, =0.000) and a linear relationship between β and d/c (-6.671, =0.000).@*CONCLUSIONS@#The outreach angle is mainly controlled by the distance between the outer edge of the cup and the outer edge of the cup in the inferior portion(d) during the operation. The distance b from the outer edge of the cup can be used as a reference.

Confirmation of the Relation between Femoral Artery and Vein for Central Venous Cannulation: A Prospective Investigation Using Ultrasound

PURPOSE: Femoral vein catheterization is often performed using a landmark technique, despite the recommended method of using ultrasound guidance. Although the landmark-based procedure is a well-known, widely adopted method to date, there are insufficient studies validating the effectiveness of this method. Hence, the purpose of this study was to confirm the relationship between femoral artery and vein using an ultrasound, as well as to validate the effectiveness of the femoral vein catheterization method using the landmark technique. METHODS: This was a prospective, repeated measurement study. Using an ultrasound with a 10 MHz transducer, the femoral vein cross-sectional areas on the right side were saved at a distance of 1, 2, 3, and 4 cm from the inguinal ligament with supine and hip abduction-external rotation positions. The width of the femoral vessels, center-to-center distance between the femoral artery and vein(horizontal distance between the center of the femoral artery and vein) and width of exposed femoral vein (not posterior to femoral artery) were measured. RESULTS: The width of the femoral vein, the center-to-center distance between the femoral artery and vein, as well as the width of the exposed femoral vein were significantly decreased as the distance from the inguinal ligament was increased, regardless of the posture change (p<0.001). However, at a distance of 1 cm from the inguinal ligament, only 5.4% of the femoral veins were exposed without disturbance of the femoral artery, and there were also a few cases in which the femoral veins were not exposed at all. CONCLUSION: It appears that an ultrasound-guided femoral vein catheterization is recommended over the conventional landmark technique.

The impact of reorienting cone-beam computed tomographic images in varied head positions on the coordinates of anatomical landmarks

PURPOSE: The aim of this study was to compare the coordinates of anatomical landmarks on cone-beam computed tomographic (CBCT) images in varied head positions before and after reorientation using image analysis software. MATERIALS AND METHODS: CBCT images were taken in a normal position and four varied head positions using a dry skull marked with 3 points where gutta percha was fixed. In each of the five radiographic images, reference points were set, 20 anatomical landmarks were identified, and each set of coordinates was calculated. Coordinates in the images from the normally positioned head were compared with those in the images obtained from varied head positions using statistical methods. Post-reorientation coordinates calculated using a three-dimensional image analysis program were also compared to the reference coordinates. RESULTS: In the original images, statistically significant differences were found between coordinates in the normal-position and varied-position images. However, post-reorientation, no statistically significant differences were found between coordinates in the normal-position and varied-position images. CONCLUSION: The changes in head position impacted the coordinates of the anatomical landmarks in three-dimensional images. However, reorientation using image analysis software allowed accurate superimposition onto the reference positions.

A comparative study of the deviation of the menton on posteroanterior cephalograms and three-dimensional computed tomography

PURPOSE: Facial asymmetry has been measured by the severity of deviation of the menton (Me) on posteroanterior (PA) cephalograms and three-dimensional (3D) computed tomography (CT). This study aimed to compare PA cephalograms and 3D CT regarding the severity of Me deviation and the direction of the Me. MATERIALS AND METHODS: PA cephalograms and 3D CT images of 35 patients who underwent orthognathic surgery (19 males and 16 females, with an average age of 22.1±3.3 years) were retrospectively reviewed in this study. By measuring the distance and direction of the Me from the midfacial reference line and the midsagittal plane in the cephalograms and 3D CT, respectively, the x-coordinates (x1 and x2) of the Me were obtained in each image. The difference between the x-coordinates was calculated and statistical analysis was performed to compare the severity of Me deviation and the direction of the Me in the two imaging modalities. RESULTS: A statistically significant difference in the severity of Me deviation was found between the two imaging modalities (Δx=2.45±2.03 mm, p<0.05) using the one-sample t-test. Statistically significant agreement was observed in the presence of deviation (k=0.64, p<0.05) and in the severity of Me deviation (k=0.27, p<0.05). A difference in the direction of the Me was detected in three patients (8.6%). The severity of the Me deviation was found to vary according to the imaging modality in 16 patients (45.7%). CONCLUSION: The measurement of Me deviation may be different between PA cephalograms and 3D CT in some patients.

A pictorial review of signature patterns living in musculoskeletal ultrasonography

The musculoskeletal system is mainly composed of the bones, muscles, tendons, and ligaments, in addition to nerves and blood vessels. The greatest difficulty in an ultrasonographic freeze-frame created by the examiner is recognition of the targeted structures without indicators, since an elephant's trunk may not be easily distinguished from its leg. It is not difficult to find descriptive ultrasonographic terms used for educational purposes, which help in distinguishing features of these structures either in a normal or abnormal anatomic condition. However, the terms sometimes create confusion when describing common objects, for example, in Western countries, pears have a triangular shape, but in Asia they are round. Skilled experts in musculoskeletal ultrasound have tried to express certain distinguishing features of anatomic landmarks using terms taken from everyday objects which may be reminiscent of that particular feature. This pictorial review introduces known signature patterns of distinguishing features in musculoskeletal ultrasound in a normal or abnormal condition, and may stir the beginners' interest to play a treasure-hunt game among unfamiliar images within a boundless ocean.

A pictorial review of signature patterns living in musculoskeletal ultrasonography

The musculoskeletal system is mainly composed of the bones, muscles, tendons, and ligaments, in addition to nerves and blood vessels. The greatest difficulty in an ultrasonographic freeze-frame created by the examiner is recognition of the targeted structures without indicators, since an elephant's trunk may not be easily distinguished from its leg. It is not difficult to find descriptive ultrasonographic terms used for educational purposes, which help in distinguishing features of these structures either in a normal or abnormal anatomic condition. However, the terms sometimes create confusion when describing common objects, for example, in Western countries, pears have a triangular shape, but in Asia they are round. Skilled experts in musculoskeletal ultrasound have tried to express certain distinguishing features of anatomic landmarks using terms taken from everyday objects which may be reminiscent of that particular feature. This pictorial review introduces known signature patterns of distinguishing features in musculoskeletal ultrasound in a normal or abnormal condition, and may stir the beginners' interest to play a treasure-hunt game among unfamiliar images within a boundless ocean.

Microsurgical landmarks in minimally invasive transforaminal lumbar interbody fusion / Referências microcirúrgicas em fusão intersomática lombar transforaminal minimamente invasiva / Referencias microquirúrgicas en la fusión intersomática lumbar transforaminal de mínima invasión

Microsurgical landmarks of the facet joint complex were defined to provide guidance and security within the tubular retractor during transforaminal surgery. A retrospective observational study was performed in segments L4-L5 by the left side approach. Microsurgical relevant photos, anatomical models and drawing were used to expose the suggested landmarks. The MI-TLIF technique has advantages compared with conventional open TLIF technique, however minimally invasive technique implies lack of security for the surgeon due to the lack of defined microanatomical landmarks compared to open spine surgery, and disorientation within the tubular retractor, the reason why to have precise microsurgical references and its recognition within the surgical field provide speed and safety when performing minimally invasive technique.

Foram definidas referências anatômicas microcirúrgicas do complexo facetário para obter orientação e segurança no interior do retrator tubular durante a cirurgia transforaminal. Realizou-se um estudo observacional retrospectivo dos procedimentos MI-TLIF nos segmentos L4-L5 com acesso lateral esquerdo. Foram empregados fotos microcirúrgicas relevantes, modelo anatômico e esquemas para expor as referências sugeridas. A técnica de MI-TLIF tem vantagens quando comparada com a técnica TLIF a céu aberto convencional, no entanto, a técnica minimamente invasiva implica falta de segurança para o cirurgião, devido à ausência de referências microanatômicas definidas em comparação com a cirurgia a céu aberto, além de falta de orientação no interior do retrator tubular. Por isso, ter referências microcirúrgicas precisas e seu reconhecimento dentro do campo cirúrgico proporciona rapidez e segurança ao realizar a técnica minimamente invasiva.

Se definieron las referencias anatómicas microquirúrgicas del complejo facetario para aportar orientación y seguridad dentro del portal tubular durante la cirugía transforaminal. Se realizó un estudio observacional retrospectivo de procedimientos MI-TLIF en segmentos L4-L5 abordados del lado izquierdo. Se utilizaron fotos microquirúrgicas relevantes, modelo anatómico y esquemas para exponer las referencias anatómicas sugeridas. La técnica de MI-TLIF tiene ventajas comparada con la técnica abierta convencional de TLIF, sin embargo la técnica mínimamente invasiva confiere falta de seguridad para el cirujano debido a la carencia de referencias microanatómicas definidas comparado con la cirugía abierta y desorientación dentro del acceso tubular por lo que tener referencias microquirúrgicas precisas y su reconocimiento dentro del campo quirúrgico aportan rapidez y seguridad al realizar la técnica mínimamente invasiva.

Three-dimensional Digital Evaluation of Dental Arches in Infants with Cleft Lip and/or Palate

The aim of this study was to measure and compare the dimensions of the dental arches on three-dimensional digital study models in children with and without cleft lip and palate before the primary surgery. The sample consisted of 223 digital models of children aged 3-9 months, divided into 5 groups: without craniofacial deformities, unilateral and bilateral incomplete cleft lip and alveolus, unilateral and bilateral complete cleft lip and alveolus, unilateral cleft lip and palate, and bilateral cleft lip and palate. Dental casts of the maxillary dental arches of the children were used. The dental casts underwent a process of scanning through 3D scanner and the measurements used for the correlation among groups were made on the scanned images. Statistical analysis was performed by t test and ANOVA followed by Tukey test. The results showed that the intercanine distance and anterior cleft width was wider in children with unilateral cleft lip and palate. The intertuberosity distances and posterior cleft width was wider in children with bilateral cleft lip and palate among the groups. Children with cleft lip and palate before the primary surgery had wider maxillary arch dimensions than the children without cleft lip and palate.

O propósito deste trabalho foi mensurar e comparar as dimensões dos arcos dentários em modelos digitais tridimensionais de crianças com ou sem fissuras de lábio e palato antes das cirurgias primárias. A amostra foi composta de 223 modelos de gesso de crianças, de 3 a 9 meses, divididas em 5 grupos: sem deformidades craniofaciais, fissura pré-forame incompleta, fissura pré-forame completa, fissura transforame unilateral e fissura transforame bilateral. Modelos de gesso dos arcos dentários superiores das crianças foram utilizados para avaliação. Os modelos passaram por um processo de digitalização, por meio de escâner 3D e as medidas utilizadas para a correlação entre os grupos foram realizadas diretamente nas imagens escaneadas. A análise estatística foi realizada por meio do teste t e ANOVA seguido pelo teste de Tukey. Os resultados mostraram que a distância intercaninos e a amplitude anterior da fissura foram maiores nas crianças com fissura transforame unilateral. A distância intertuberosidades e a amplitude posterior da fissura foi maior nas com fissura transforame bilateral entre os grupos estudados. As crianças com fissura de lábio e palato apresentam as dimensões dos arcos maxilares maiores que as crianças sem fissura labiopalatina antes das cirurgias primárias.